Home > SKIDSTEER DRIVERS >

POST DRIVER, POST POUNDER: SS660 Skidsteer Quick Attach, HydTilt, 110Klbs Force

POST DRIVER, POST POUNDER: SS660 Skidsteer Quick Attach, HydTilt, 110Klbs Force


 
Alternative Views:




Availability:: Usually Ships in 1 to 2 Weeks
Product Code: HECTOR_SS
 

Description
 

GENERAL FEATURES:

  • In addition To Hydraulic (left & right) Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, this Wrag Driver is also Self-Contained!
    • The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck (usually in the engine compartment)!
    • The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them, and also eliminates the down time caused by broken springs!
    • Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available - again contributing to efficiency & Straight Posts!
    • Front & Back Tilt adjustment uses the Skid Steer's bucket dump/rollback.
  • Wrag Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
  • Expect the 7/8" diameter, industrial poly/cotton braided Rope to have a very long, trouble free service life, and to be easy & safe on & for your hands!
  • This Unique Driver is also void of cables & hinged masts, which are more maintenance points, and which occasionally work against the operator!
  • Also, since the post is not nested in the webbing of an 'I' beam (as w/most Drivers), this Wrag Driver enables filling an existing fence line with posts, w/o stretching or damaging the existing fence!
  • Skid Steer Frame is 'hardware attached' to accommodate versatility of mounts:
    • This Driver can be used with Excavators, Telehandlers, Backhoes, Wheel Loaders, etc.
    • We do have mounts available to list for those applications!
    • Unlike other Skidsteer Drivers, visibility & cab access have minimal obstruction!
  • Driver Ships Complete Including:
    • Skid Steer Hitch Kit with Stabilizer Legs & Stand.
    • Hydraulic Hoses & Couplers.
    • Ships 99% assembled - Only the Skid Steer Q/A Plate will need to be attached.
  • For the toughest ground and/or largest post diameters, there is an optional Rock Spike & Extractor Kit for making Pilot Holes.
    • Rock Spike & Extractor Kit is a $3500.00 option & available to be listed on our Store.
      • Standard Rock Spike Tip is 4" diameter.
      • Optional 6" diameter Rock Spike Tips are available for an additional $200.00.
    • With Rock Spike & Extractor Kit 'Mounting Lugs' being a standard feature, installation is a quick & simple one-bolt activity!
    • The Spool Valve required for operating the Rock Spike & Extractor Kit is also standard on this Driver.
    • More photos & information can be seen at the following link: Wrag Hector Post Driver
  • Adapters for Driving Tee Posts, Oil Field Pipe or Oil Field Casings are available for $200.00.
    • Adapters have the same cost, but vary in dimension & configuration - specific application must be identified to get correct Adapter.
  • Driver is shown on a Skid Steer for reference only - Skid Steer is not included.
  • One photo shows the Safety Shield 'Standard on ALL Wrag Drivers' & Must be Used for Personnel Safety!
    • Driver includes the Guard & it Must be used!
  • Specifications are based on manufacturer provided data & subject to change w/o notice.
  • View a Video of this Post Driver at work at the following link: Hector Post Driver.
SPECIFICATIONS:
  • Minimum hydraulic requirement is 15GPM/1800PSI.
  • Maximum post diameter is 8-1/4".
  • Functionality Dimensions:
    • Driver Leg Fully Extended is 48".
      • Drives maximum 10'-7" long post.
      • Drives down to 4'-0" above grade.
    • Driver Leg Fully Retracted:
      • Drives maximum 7'-10" long post.
      • Drives down to 13" above grade.
  • Hammer weight is 660lb's.
  • Impact at full stroke is 110,000lb's.
  • Overall length in the fully contracted position is 11'-0".
  • Overall length in the fully extended position is 14'-0".
  • Tilt Adjustment (left/right) is 17 degrees either way.
  • Tilt Adj (front) is based on dump rotation of Loader Arms:
    • On most Skid Steers, this is full 90 degree forward rotation.
  • Tilt Adjustment (rear) is 10 Degrees.
  • Weight is 1213lb's.

Share your knowledge of this product. Be the first to write a review »