POST DRIVER: Track Machine & Commander 300 Tilt, 90°Swing, Offset, 110KlbsForce

POST DRIVER: Track Machine & Commander 300 Tilt, 90°Swing, Offset, 110KlbsForce: Springless,Self Contained,Open Frame,Pilot/Rock Spike!


Availability:: Usually Ships in 2-6 Weeks
Product Code: TRACK



  • In addition To Hydraulic (left & right) Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, this Wrag Driver is also Self-Contained!
    • The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck!
    • The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them, and also eliminates the down time caused by broken springs!
    • Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available - again contributing to efficiency & Straight Posts!
    • 4-Way (Front & Back) Tilt adjustment is Hydraulic.
    • 90 Degree Swing is from rear center mounted position to right of Track Machine (rotating counter-clockwise).
    • Hydraulically Telescoping Mast Leg makes height position a piece-of-cake!
    • Rear, adjustable Stabilizer Legs are standard, and work in conjunction with the Telescoping Mast Leg.
  • All of the unique and 'easy-to-use' positioning features assist in Driving straight Posts & eliminates the need to constant repositioning to achieve precise placement of the forward & reverse positioning of the Track Machine, further contributing to your operations efficiency!
  • Wrag Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
  • Expect the 7/8" diameter, industrial poly/cotton braided Rope to have a very long, trouble free service life, and to be easy & safe on & for your hands!
  • This Unique Driver is also void of cables & hinged masts, which are more maintenance points, and which occasionally work against the operator!
  • Also, since the post is not nested in the webbing of an 'I' beam (as w/most Drivers), this Wrag Driver enables filling an existing fence line with posts, w/o stretching or damaging the existing fence!
  • Rock Spike/Pilot Hole Spike & Extractor Kit is Standard, and Obviously Beneficial in the Worst Ground Conditions.
  • Minimum hydraulic requirement is 15GPM/1800PSI.
  • Maximum post diameter is 8-1/4".
  • Functionality Dimensions:
    • Horizontally Articulated/Positioned Headstock Frame Provides an additional 15" of Offset Positioning.
    • Driver Legs Fully Extended:
      • Drives maximum 9' long post.
        • 10' Post length capable - customer must advise if required!
      • Drives down to +/-30" above grade.
    • Driver Legs Fully Retracted:
      • Drives maximum 8' long post.
      • Drives down to 18" above grade.
  • Hammer weight is 660lb's.
  • Impact at full stroke is 110,000lb's.
  • Overall length in the fully contracted position is 11'-0".
  • Overall length in the fully extended position is 14'-0".
  • 4-Way Tilt Adjustment (left/right-front/rear) is about 17 degrees.
    • Tilt Adjustment can be used in any of the other articulated positions!
  • Horizontal Swing is 90 degrees and is complimented with the Horizontal Telescoping feature!


  • Track Machine is Powered by a 3 Cylinder Yanmar Diesel Engine.
  • Warrior Hydraulic Winch has 13/16" Dia x 83' long Wire Cable & 10,000ft lb's of pulling Torque.
  • Overall Dimensions:
    • Height from Grade to Post Storage Table is 31".
    • Height from Grade to Top Of Driver (in Forward Folded Transport Position) is 9'-11".
    • Overall Length From Front-Most Bunker Upright Tube to Rear-Most Point of Driver Overhang is 16'-5".
      • Front-Most Bunker Upright Tube Telescopes out 27" For additional Storage.
    • Tracks Width is 60".
      • Weights on the left side protrude 6" beyond the left Track side.
    • Widest point is the Rear Driver Stands at 70".
  • Total Weight (Driver & Track Machine) is 7200lb's.
Driver Is New & Covered By Factory Warranty. Track Machine Is Used & Sold 'As-Is', No Warranty.

Share your knowledge of this product. Be the first to write a review »