 |
 |
 |
 |
GENERAL FEATURES:
-
In addition To 4-Way Hydraulic Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, this WRAG Driver is also Self-Contained!
-
The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck (usually in the engine compartment)!
-
The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them, and also eliminates the unexpected down time caused by broken springs!
-
Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available - again contributing to efficiency & Straight Posts!
-
WRAG Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
-
Expect the 7/8" diameter, industrial poly/cotton braided Rope to have a very long, trouble free service life, and to be easy & safe on & for your hands!
-
This Unique Driver is also void of cables & hinged masts, which are more maintenance points, and which occasionally work against the operator!
-
Also, since the post is not nested in the webbing of an 'I' beam (as w/most Drivers), this WRAG Driver enables filling an existing fence line with posts, w/o stretching or damaging the existing fence!
-
Driver Includes the Following:
-
For the Toughest Ground &/or Largest Post Diameters, there's an Optional Rock Spike & Extractor Kit for making Pilot Holes.
-
Driver is shown on a Tractor for reference only - Tractor is NOT included.
-
One photo shows the Safety Shield 'Standard on ALL WRAG Drivers' & Must be Used for Personnel Safety!
SPECIFICATIONS:
-
Suitable for Tractors with Cat 2, 3-Point Hitches.
-
Minimum hydraulic requirement is 10GPM/1800PSI.
-
Maximum post diameter is 8-1/4".
-
Functionality Dimensions:
-
Above spec's for Post Lengths & above grade positioning are conservative, and subject to Tractors 3-Point & Tire Sizes.
-
Above spec's are as measured on a 80hp tractor w/30" rear tires, lift links mostly extended.
-
Hammer weight is 660lb's.
-
Impact at full stroke is 110,000lb's.
-
Overall length in the fully contracted position is 11'-0".
-
Overall length in the fully extended position is 14'-0".
-
Tilt Adjustment (left/right) is 22°.
-
Tilt Adjustment (front/rear) is 22°.
-
Weight is 1532lb's.
-
Specifications are based on manufacturer provided data & subject to change w/o notice.
|
|
 |
 |
 |
 |

|