 |
 |
 |
 |
GENERAL FEATURES:
-
In addition To Hydraulic (left & right) Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, this WRAG Driver is also Self-Contained!
-
Pilot Hole Rock Spike & Hydraulic Extractor Kit with 4" Tip.
-
The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck (usually in the engine compartment)!
-
The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them & also eliminates the unexpected down time caused by broken springs!
-
Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available - again contributing to Efficiency & Straight Posts!
-
4-Way (Front & Back) Tilt Adjustment is Hydraulic.
-
90° Swing is from rear center mounted position to right of Tractor (rotating counter-clockwise).
-
Horizontal Telescoping Feature offers 14-1/2" of adjustment in any location of the 90° swing.
-
Hydraulically Telescoping Power Leg makes height positioning a piece of cake!
-
Rear, manually adjusted Rear Stabilizer Legs are standard & work in conjunction with the Telescoping Power Leg.
-
All of the unique & easy to use positioning features assist in Driving straight Posts & they eliminate the need for constantly re-positioning the Tractor to achieve precise placement of the Driver & Post, providing an Overall Operation Efficiency!
-
WRAG Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
-
Expect the Industrial Poly/Cotton Braided Rope to have a very long & trouble free service life, and to be safe & easy on your hands!
-
This Unique Driver is also void of Cables & Hinged Masts, which are more maintenance points & which can work against the Operator!
-
Also, since the Post is not nested in the webbing of an 'I' Beam (as w/most Drivers), this WRAG Driver enables filling an existing Fence Line with Posts, w/o stretching or damaging the existing Fence!
-
Driver Includes the Following:
-
Driver is shown on a 'LS' Tractor for reference only - Tractor is not included.
SPECIFICATIONS:
-
Minimum Hydraulic Requirement is 15GPM/1800PSI.
-
Maximum Post Diameter: 10".
-
Functionality Dimensions:
-
Center of 3-Pt Frame to Center of Post Cap, Retracted is 57".
-
Center of 3-Pt Frame to Center of Post Cap, Extended is 71-1/2".
-
-
Above spec's for Post Lengths & above Grade Positioning are conservative & subject to Tractors 3-Point & Tire sizes.
-
Above spec's are as measured on a 80hp Tractor w/30" rear Tires, Lift Links mostly extended.
-
Hammer weight is 660lb's.
-
Impact at Full Stroke is 110,000lb's.
-
4-Way Tilt Adjustment (left/right-front/rear) is about 22°.
-
Horizontal Swing is 90° and is complimented with the Horizontal Telescoping feature!
-
Weight is 2196lb's with Rock Spike Kit.
-
Specifications are based on manufacturer provided data & subject to change.
|
|
 |
 |
 |
 |

|