 |
 |
 |
 |
GENERAL FEATURES:
-
In addition To Hydraulic (left & right) Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, this WRAG Driver is also Self-Contained!
-
The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck!
-
The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them, and also eliminates the down time caused by broken springs!
-
Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available - again contributing to efficiency & Straight Posts!
-
4-Way (Front & Back) Tilt adjustment is Hydraulic.
-
90° Swing is from rear center mounted position to right of tractor (rotating counter-clockwise).
-
Horizontal Telescoping Feature offers 14-1/2" of adjustment in any location of the 90° swing.
-
Hydraulically Telescoping Mast Leg makes height position a piece of cake!
-
Rear, adjustable Stabilizer Legs are standard, and work in conjunction with the Telescoping Mast Leg.
-
All of the unique and easy to use positioning features assist in Driving straight Posts, and they eliminate the need for constantly re-positioning the Tractor to achieve precise placement of the Driver & Post - which provides an overall operation efficiency!
-
WRAG Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
-
Expect the 7/8" diameter, industrial poly/cotton braided Rope to have a very long, trouble free service life, and to be easy & safe on & for your hands!
-
This Unique Driver is also void of cables & hinged masts, which are more maintenance points, and which occasionally work against the operator!
-
Also, since the post is not nested in the webbing of an 'I' beam (as w/most Drivers), this WRAG Driver enables filling an existing fence line with posts, w/o stretching or damaging the existing fence!
-
Driver Includes the Following:
-
For the Toughest Ground &/or Largest Post Diameters, there's an Optional Rock Spike & Extractor Kit for making Pilot Holes.
-
With Rock Spike & Extractor Kit 'Mounting Lugs' Being a Standard Feature on this Driver, Installation is a Quick & Simple One-Bolt Activity!
-
The Spool Valve Required for Operating the Rock Spike & Extractor Kit is also Standard on this Driver.
-
Driver is shown on a Tractor for reference only - Tractor is NOT included.
SPECIFICATIONS:
-
Minimum hydraulic requirement is 15GPM/1800PSI.
-
Maximum post diameter is 10".
-
Functionality Dimensions:
-
Center of 3-Pt Frame to Center of Post Cap, Retracted is 57".
-
Center of 3-Pt Frame to Center of Post Cap, Extended is 71-1/2".
-
Above spec's for Post Lengths & above grade positioning are conservative, and subject to Tractors 3-Point & tire sizes.
-
Above spec's are as measured on a 80hp tractor w/30" rear tires, lift links mostly extended.
-
Hammer weight is 660lb's.
-
Impact at full stroke is 110,000lb's.
-
Overall length in the fully contracted position is 11'-0".
-
Overall length in the fully extended position is 14'-0".
-
4-Way Tilt Adjustment (left/right-front/rear) is about 17°.
-
Horizontal Swing is 90° and is complimented with the Horizontal Telescoping feature!
-
Weight is 2145lb's.
-
Specifications are based on manufacturer provided data & subject to change w/o notice.
|
|
 |
 |
 |
 |

|