Home > 3-POINT DRIVERS >

Basic XL300 w/Rock Spike: 4-Way Hyd Tilt, 90° Swing, Side Shift Offset, 110Klb's Driving Force, SSQ/A Adaptable - Click To See More!

WRAG Post Driver w/Rock Spike, Basic XL300


 


Availability:: Usually Ships in 1 to 3 Weeks
Product Code: BASICXL300WROCKSPIKE
 

Description
 
GENERAL FEATURES:
  • In addition To Hydraulic (left & right) Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, this WRAG Driver is also Self-Contained!
    • Pilot Hole Rock Spike & Hydraulic Extractor Kit with 4" Tip.
    • The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck (usually in the engine compartment)!
    • The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them & also eliminates the unexpected down time caused by broken springs!
    • Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available - again contributing to Efficiency & Straight Posts!
    • 4-Way (Front & Back) Tilt Adjustment is Hydraulic.
    • 90° Swing is from rear center mounted position to right of Tractor (rotating counter-clockwise).
    • Horizontal Telescoping Feature offers 14-1/2" of adjustment in any location of the 90° swing.
    • Hydraulically Telescoping Power Leg makes height positioning a piece of cake!
    • Rear, manually adjusted Rear Stabilizer Legs are standard & work in conjunction with the Telescoping Power Leg.
  • All of the unique & easy to use positioning features assist in Driving straight Posts & they eliminate the need for constantly re-positioning the Tractor to achieve precise placement of the Driver & Post, providing an Overall Operation Efficiency!
  • WRAG Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
  • Expect the Industrial Poly/Cotton Braided Rope to have a very long & trouble free service life, and to be safe & easy on your hands!
  • This Unique Driver is also void of Cables & Hinged Masts, which are more maintenance points & which can work against the Operator!
  • Also, since the Post is not nested in the webbing of an 'I' Beam (as w/most Drivers), this WRAG Driver enables filling an existing Fence Line with Posts, w/o stretching or damaging the existing Fence!
  • Driver Includes the Following:
    • Hydraulic Hoses & Couplers.
  • Driver is shown on a 'LS' Tractor for reference only - Tractor is not included.
SPECIFICATIONS:
  • Minimum Hydraulic Requirement is 15GPM/1800PSI.
  • Maximum Post Diameter: 10".
  • Functionality Dimensions:
    • Horizontal Telescoping & Offset (Travel Range is 14-1/2"):
      • Center of 3-Pt Frame to Center of Post Cap, Retracted is 57".
      • Center of 3-Pt Frame to Center of Post Cap, Extended is 71-1/2".
      • For 15" more hydraulic offset, see the Commander XL300.
    • Driver Legs Fully Extended:
      • Drives maximum 9' long post.
      • Drives down to +/-30" above grade.
    • Driver Legs Fully Retracted:
      • Drives maximum 8' long post.
      • Drives down to 18" above grade.
    • Above spec's for Post Lengths & above Grade Positioning are conservative & subject to Tractors 3-Point & Tire sizes.
    • Above spec's are as measured on a 80hp Tractor w/30" rear Tires, Lift Links mostly extended.
  • Hammer weight is 660lb's.
  • Impact at Full Stroke is 110,000lb's.
  • 4-Way Tilt Adjustment (left/right-front/rear) is about 22°.
    • Tilt Adjustment can be used in any of the other Articulated Positions!
  • Horizontal Swing is 90° and is complimented with the Horizontal Telescoping feature!
  • Weight is 2196lb's with Rock Spike Kit.
  • Specifications are based on manufacturer provided data & subject to change.