Home > SKIDSTEER DRIVERS >

POST DRIVER, POST POUNDER: SS660 Skidsteer Quick Attach, Hydraulic Tilt, 110Klbs Force

WRAG SS660 Skid Steer Q/A Post Driver


 
Alternative Views:




Availability:: Usually Ships in 1 to 2 Weeks
Product Code: HECTOR_SS
 

Description
 

GENERAL FEATURES:

  • In addition To Hydraulic (left & right) Tilt Adjustments & 110,000lb's of 'Springless' Driving Force, this WRAG Driver is also Self-Contained!
    • The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck (usually in the engine compartment)!
    • The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them, and also eliminates the down time caused by broken springs!
    • Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available - again contributing to efficiency & Straight Posts!
    • Front & Back Tilt adjustment uses the Skid Steer's bucket dump/rollback.
  • WRAG Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibility!
  • Expect the 7/8" diameter, industrial poly/cotton braided Rope to have a very long, trouble free service life, and to be easy & safe on & for your hands!
  • This Unique Driver is also void of cables & hinged masts, which are more maintenance points, and which occasionally work against the operator!
  • Also, since the post is not nested in the webbing of an 'H' beam (as w/most Drivers), this WRAG Driver enables filling an existing fence line with posts, w/o stretching or damaging the existing fence wire!
  • Skid Steer Frame is 'hardware attached' to accommodate versatility of mounts:
    • Unlike other Skidsteer Drivers, visibility & cab access have minimal obstruction!
  • Driver Includes the Following:
    • Skid Steer Hitch Kit with Stabilizer Legs & Stand.
    • Hydraulic Hoses & Couplers.
    • Ships 99% assembled - Only the Skid Steer Q/A Plate will need to be attached.
  • For the Toughest Ground &/or Largest Post Diameters, there's an Optional Rock Spike & Extractor Kit for making Pilot Holes.
    • Rock Spike & Extractor Kit is a $3500.00 Option & Available to List on our Store.
      • Standard Rock Spike Tip is 4" Diameter.
      • Upgrade to 6" Diameter Rock Spike Tip (in lieu of 4") is $200.00.
    • With Rock Spike & Extractor Kit 'Mounting Lugs' Being a Standard Feature on this Driver, Installation is a Quick & Simple One-Bolt Activity!
  • Driver is Shown on a Skid Steer for Reference Only - Skid Steer is NOT Included.
  • One Photo shows the Safety Shield 'Standard on ALL WRAG Drivers' & Must be Used for Personnel Safety!
    • Photos w/o the Guard are shown for Product Detail Clarity - Driver includes the Guard & it Must be Used!
SPECIFICATIONS:
  • Minimum hydraulic requirement is 15GPM/1800PSI.
  • Maximum post diameter is 8-1/4".
  • Functionality Dimensions:
    • Driver Leg Fully Extended is 48".
      • Drives maximum 10'-7" long post.
      • Drives down to 4'-0" above grade.
    • Driver Leg Fully Retracted:
      • Drives maximum 7'-10" long post.
      • Drives down to 13" above grade.
  • Hammer weight is 660lb's.
  • Impact at full stroke is 110,000lb's.
  • Overall length in the fully contracted position is 11'-0".
  • Overall length in the fully extended position is 14'-0".
  • Tilt Adjustment (left/right) is 22° either way.
  • Tilt Adj (front) is based on dump rotation of Loader Arms:
    • On most Skid Steers, this is full 90° forward rotation.
  • Tilt Adjustment (rear) is 10°.
  • Weight is 1600lb's.
  • Specifications are based on manufacturer provided data & subject to change w/o notice.